Software Testing Interview Questions and Answers

Software Testing Interview Questions and Answers

Last updated on 24th Oct 2020, Blog, Interview Question

About author

Prithiv (Sr Project Manager )

He is a Proficient Technical Expert for Respective Industry Domain & Serving 7+ Years. Also, Dedicated to Imparts the Informative Knowledge's to Freshers. He Share's this Blogs for us.

(5.0) | 14452 Ratings 2359

Are you preparing for software testing job interview? Looking for the right material to prepare well for the Job interview. Here’s a solution to prepare well and crack your job interview. Software testing is the most demanding job in the current IT market. Many companies are looking to hire qa engineers, testing professionals, quality control and QC engineers for various levels. Software testing the process of running or executing a certain software to find the software bugs, and verifying that the system to meet the requirements including, functional, performance, reliability, security, usability and so on. It helps to find the quality defects if any in the process of product design and development and make sure to deliver the right utmost quality product. Wisdom jobs designed job interview questions and answers sites for the enthusiastic testing professionals, GO through our Software testing job interview questions and answers page to win the job search.

1.What Is The Main Benefit Of Designing Tests Early In The Life Cycle?


It helps prevent defects from being introduced into the code.

2.What Is Risk-based Testing?


Risk-based Testing is the term used for an approach to creating a test strategy that is based on prioritizing tests by risk. The basis of the approach is a detailed risk analysis and prioritizing of risks by risk level. Tests to address each risk are then specified, starting with the highest risk first.

3.A Wholesaler Sells Printer Cartridges. The Minimum Order Quantity Is 5. There Is A 20% Discount For Orders Of 100 Or More Printer Cartridges. You Have Been Asked To Prepare Test Cases Using Various Values For The Number Of Printer Cartridges Ordered. Which Of The Following Groups Contain Three Test Inputs That Would Be Generated Using Boundary Value Analysis?


4, 5, 99

4.What Is The Key Difference Between Preventative And Reactive Approaches To Testing?


Preventative tests are designed early; reactive tests are designed after the software has been produced.

5.What Is The Purpose Of Exit Criteria?


The purpose of exit criteria is to define when a test level is completed.

6.What Determines The Level Of Risk?


The likelihood of an adverse event and the impact of the event determine the level of risk.

7.When Is Used Decision Table Testing?


Decision table testing is used for testing systems for which the specification takes the form of rules or cause-effect combinations. In a decision table the inputs are listed in a column, with the outputs in the same column but below the inputs. The remainder of the table explores combinations of inputs to define the outputs produced.

8.What Is The Main Objective When Reviewing A Software Deliverable?


To identify defects in any software work product.

9.Which Of The Following Defines The Expected Results Of A Test? Test Case Specification Or Test Design Specification.


Test case specification defines the expected results of a test.

10.What Is The Benefit Of Test Independence?


It avoids author bias in defining effective tests.

11.As Part Of Which Test Process Do You Determine The Exit Criteria?


The exit criteria is determined on the bases of ‘Test Planning’.

Subscribe For Free Demo

Error: Contact form not found.

12.What Is Beta Testing?


Testing performed by potential customers at their own locations.

13.dimension = Height
Elsebiggest_dimension = Length
If Height > Le3. Given The Following Fragment Of Code, How Many Tests Are Required For 100% Decision Coverage?
If Width > Length
Thenbiggest_dimension = Width
If Height > Width
Thenbiggest_dimension = Height



14.You Have Designed Test Cases To Provide 100% Statement And 100% Decision Coverage For The Following Fragment Of Code. If Width > Length Then Biggest_dimension = Width Else Biggest_dimension = Length End_if The Following Has Been Added To The Bottom Of The Code Fragment Above. Print “biggest Dimension Is ” &biggest_dimensionprint “width: ” & Width Print “length: ” & Length How Many More Test Cases Are Required?


None, existing test cases can be used.

15.Rapid Application Development?


Rapid Application Development (RAD) is formally a parallel development of functions and subsequent integration. Components/functions are developed in parallel as if they were mini projects, the developments are time-boxed, delivered, and then assembled into a working prototype. This can very quickly give the customer something to see and use and to provide feedback regarding the delivery and their requirements.
Rapid change and development of the product is possible using this methodology. However the product specification will need to be developed for the product at some point, and the project will need to be placed under more formal controls prior to going into production.

16.What Is The Difference Between Testing Techniques And Testing Tools?


Testing technique:

Is a process for ensuring that some aspects of the application system or unit functions properly there may be few techniques but many tools.

Testing Tools:

Is a vehicle for performing a test process. The tool is a resource to the tester, but itself is insufficient to conduct testing.

17.We Use The Output Of The Requirement Analysis, The Requirement Specification As The Input For Writing…


User Acceptance Test Cases.

18.Repeated Testing Of An Already Tested Program, After Modification, To Discover Any Defects Introduced Or Uncovered As A Result Of The Changes In The Software Being Tested Or In Another Related Or Unrelated Software Component:


Regression Testing

19.What Is Component Testing?


Component testing, also known as unit, module and program testing, searches for defects in, and verifies the functioning of software (e.g. modules, programs, objects, classes, etc.) that are separately testable. Component testing may be done in isolation from the rest of the system depending on the context of the development life cycle and the system. Most often stubs and drivers are used to replace the missing software and simulate the interface between the software components in a simple manner. A stub is called from the software component to be tested; a driver calls a component to be tested.

20.What Is Functional System Testing?


Testing the end to end functionality of the system as a whole is defined as a functional system testing.

21.What Are The Benefits Of Independent Testing?


Independent testers are unbiased and identify different defects at the same time.

22.In A Reactive Approach To Testing When Would You Expect The Bulk Of The Test Design Work To Be Begun?


The bulk of the test design work begun after the software or system has been produced.

23.What Are The Different Methodologies In Agile Development Model?


There are currently seven different agile methodologies that I am aware of:

  • Extreme Programming (XP)
  • Scrum
  • Lean Software Development
  • Feature-Driven Development
  • Agile Unified Process
  • Crystal
  • Dynamic Systems Development Model (DSDM)

24.Which Activity In The Fundamental Test Process Includes Evaluation Of The Testability Of The Requirements And System?


A ‘Test Analysis’ and ‘Design’ includes evaluation of the testability of the requirements and system.

25.What Is Typically The Most Important Reason To Use Risk To Drive Testing Efforts?


Because testing everything is not feasible.

26.What Is Random/monkey Testing? When It Is Used?


Random testing often known as monkey testing. In such type of testing data is generated randomly often using a tool or automated mechanism. With this randomly generated input the system is tested and results are analysed accordingly. These testing are less reliable; hence it is normally used by the beginners and to see whether the system will hold up under adverse effects.

27.Which Of The Following Are Valid Objectives For Incident Reports?


  • Provide developers and other parties with feedback about the problem to enable identification, isolation and correction as necessary.
  • Provide ideas for test process improvement.
  • Provide a vehicle for assessing tester competence.
  • Provide testers with a means of tracking the quality of the system under test.
Course Curriculum

Get On-Demand Software Testing Training for Beginners to Advance Your Career

  • Instructor-led Sessions
  • Real-life Case Studies
  • Assignments
Explore Curriculum

28.Consider The Following Techniques. Which Are Static And Which Are Dynamic Techniques?


  • Equivalence Partitioning.
  • Use Case Testing.
  • Data Flow Analysis.
  • Exploratory Testing.
  • Decision Testing.
  • Inspections.

Data Flow Analysis and Inspections are static; Equivalence Partitioning, Use Case Testing, Exploratory Testing and Decision Testing are dynamic.

29.Why Are Static Testing And Dynamic Testing Described As Complementary?


Because they share the aim of identifying defects but differ in the types of defect they find.

30.What Are The Phases Of A Formal Review?


In contrast to informal reviews, formal reviews follow a formal process. A typical formal review process consists of six main steps:

  • Planning
  • Kick-off
  • Preparation
  • Review meeting
  • Rework
  • Follow-up.

31.What Is The Role Of Moderator In Review Process?


The moderator (or review leader) leads the review process. He or she determines, in cooperation with the author, the type of review, approach and the composition of the review team. The moderator performs the entry check and the follow-up on the rework, in order to control the quality of the input and output of the review process. The moderator also schedules the meeting, disseminates documents before the meeting, coaches other team members, paces the meeting, leads possible discussions and stores the data that is collected.

32.What Is An Equivalence Partition (also Known As An Equivalence Class)?


An input or output ranges of values such that only one value in the range becomes a test case.

33.When Should Configuration Management Procedures Be Implemented?


During test planning.

34.A Type Of Functional Testing, Which Investigates The Functions Relating To Detection Of Threats, Such As Virus From Malicious Outsiders?


Security Testing

35.Testing Where In We Subject The Target Of The Test , To Varying Workloads To Measure And Evaluate The Performance Behaviours And Ability Of The Target And Of The Test To Continue To Function Properly Under These Different Workloads?


Load Testing

36.Testing Activity Which Is Performed To Expose Defects In The Interfaces And In The Interaction Between Integrated Components Is?


Integration Level Testing

37.What Are The Structure-based (white-box) Testing Techniques?


Structure-based testing techniques (which are also dynamic rather than static) use the internal structure of the software to derive test cases. They are commonly called ‘white-box’ or ‘glass-box’ techniques (implying you can see into the system) since they require knowledge of how the software is implemented, that is, how it works.

For example;

a structural technique may be concerned with exercising loops in the software. Different test cases may be derived to exercise the loop once, twice, and many times. This may be done regardless of the functionality of the software.

38.When “regression Testing” Should Be Performed?


After the software has changed or when the environment has changed Regression testing should be performed.

39.What Is Negative And Positive Testing?


A negative test is when you put in an invalid input and receives errors. While a positive testing, is when you put in a valid input and expect some action to be completed in accordance with the specification. 

40.What Is The Purpose Of A Test Completion Criterion?


The purpose of test completion criterion is to determine when to stop testing.

41.What Can Static Analysis Not Find?


For example memory leaks.

42.What Is The Difference Between Re-testing And Regression Testing?


Re-testing ensures the original fault has been removed; regression testing looks for unexpected side effects.

43.What Are The Experience-based Testing Techniques?


In experience-based techniques, people’s knowledge, skills and background are a prime contributor to the test conditions and test cases. The experience of both technical and business people is important, as they bring different perspectives to the test analysis and design process. Due to previous experience with similar systems, they may have insights into what could go wrong, which is very useful for testing.

44.What Type Of Review Requires Formal Entry And Exit Criteria, Including Metrics?



45.Could Reviews Or Inspections Be Considered Part Of Testing?


Yes, because both help detect faults and improve quality.

46.An Input Field Takes The Year Of Birth Between 1900 And 2004 What Are The Boundary Values For Testing This Field?



selenium Sample Resumes! Download & Edit, Get Noticed by Top Employers! Download

47.To Test A Function, What Has To Write A Programmer, Which Calls The Function To Be Tested And Passes It Test Data.?



48.What Is The One Key Reason Why Developers Have Difficulty Testing Their Own Work?


Lack of Objectivity

49.”how Much Testing Is Enough?”


The answer depends on the risk for your industry, contract and special requirements.

50.When Should Testing Be Stopped?


It depends on the risks for the system being tested. There are some criteria bases on which you can stop testing.

  • Deadlines (Testing, Release)
  • Test budget has been depleted
  • Bug rate fall below certain level
  • Test cases completed with certain percentage passed
  • Alpha or beta periods for testing ends
  • Coverage of code, functionality or requirements are met to a specified point.

51.Which Of The Following Is The Main Purpose Of The Integration Strategy For Integration Testing In The Small?


The main purpose of the integration strategy is to specify which modules to combine when and how many at once.

52.What Are Semi-random Test Cases?


Semi-random test cases are nothing but when we perform random test cases and do equivalence partitioning to those test cases, it removes redundant test cases, thus giving us semi-random test cases.

Are you looking training with Right Jobs?

Contact Us

Popular Courses