Browse [LATEST] SAP PI Interview Questions and Answers

1.What square measures the activities for SAP NetWeaver XI integration, implementation, post-go-live?

Ans:

SAP NetWeaver PI integration wherever the Involvement of sharing the knowledge between SAP and Non SAP System comes into image. Implementation wherever the SAP involvement within the business comes back into the image.

Go Alive once Developing the interface once seeing varied stages like testing the Interface is formed alive or wont to the period of time the situation is alleged to be GO ALIVE.

2. What’s the CCMS button in RWB?

Ans:

It is an associated alert or observation for the error messages. to observe SAP parts. CCMS is SAP Computing Center Management System. RWB is swimmingly integrated with CCMS and CCMS alerts will be viewed thro’ the Runtime work bench. It provides alert observation for SAP Exchange Infrastructure that is employed for observation of any system errors and administration errors. allows monitoring the entire system centrally.

3. What systems square measure utilized in your XI/PI Implementation?

Ans:

Usually, we are going to use Development System, Testing System(QA), Production System. however typically we are going to use Pre-Prod (Pre Production System) conjointly. Before moving all interfaces to Production you can use Pre-Prod to check all interfaces with large volumes. thus entirely can use the subsequent systems for implementation :

• DEV
• QA
• Pre-Prod
• Prod

4. Daily Activities and responsibilities of XI Developer?

Ans:

Monitoring once golive troubleshoots performance problems once a price tag arises. on the event half, it’ll be making bachelor’s degree, objects in IR, configuring in ID.

Based on the situation that what you’re operating within the low level performing on SLD, IR,ID, RWB + developing the scenario’s+Documentation + supported the wants style + observation check + Performance+..etc

5. wherever would you look to search out the system within the SLD.?

Ans:

In Business system wizard.

6. What pair of knowledge sorts square measure mechanically created once the Namespace is saved within the Integration Repository?

Ans:

ExchangeFaultdata and Exchange log knowledge.

7. that Development Object in SAP XI forms the “ROOT NODE” of AN XML document once AN XI message is generated?

Ans:

MESSAGE sort

8. What’s the connection between Product, Product Version, software system part, ANd software system part Version? provide an example.

Ans:

PRODUCT: Represents a group of all versions of a product. within the SAP setting, a product corresponds to AN SAP technical part, e.g. 4.6c, 4.6d, and 4.7.

COMPONENT: Represents a group of all versions of software system elements samples of software system elements square measure SAP_APPL, SAP_ABA, SAP_HR software system.

9. JMS adapter will speak with what form of systems? provide some examples

Ans:

Messaging systems to the combination engine.

10. What format will the JDBC adapter communicate in? Do you have to use native SQL?

Ans:

JDBC adapter converts information content to XML messages and also the alternative manner around.

11. If you communicate with JDBC exploitation XML format, what square measures four actions you’ll do?

Ans:

SELECT, INSERT, DELETE, UPDATE.

12. Will the JDBC adapter question sound unit tables? Will it insert?

Ans:

Yes

13. Will AN RFC adapter be used for asynchronous processing?

Ans:

YES, the RFC adapter is often used for asynchronous processes.

14. Is it necessary to make the partner profiles just in case of a file to idoc scenario?

Ans:

NO, it’s not perpetually necessary to make the partner profiles just in case of the file to idoc situation if you’re doing it for testing functions otherwise you’ve got to assemble partner profiles to assure XI for receiver shopper.

15. What’s the distinction between the party and also the business service and within which cases they’re used with details?

Ans:

A Communication party represents a layer unit that’s concerned during a cross-system method (eg. a company). ANd Business service represents an abstract, available unit. business services square measure utilized in the cross-company method. for eg if the parties concerned have solely printed their interfaces and not their system landscape or it’s partially legendary. unremarkably we have a tendency to use business services to speak with totally different systems within the same company.

16. What are the standard project situations on the duty (Legacy systems or ERP)?

Ans:

It depends on the client’s demand however you must fathom the R3-MDM integration. most of the necessity it’d be used. connected situations as i discussed are MDM-BIW integration, SRM-MDM Catalog, MDM-XI-R3 integration, RPCM, enrichment adapter, etc….

17. however long are typically the projects?

Ans:

It depends on the client’s necessities.

18. What’s a world instrumentality in SAP XI?

Ans:

• Container object > is solely employed in the operation it’s outlined in.
• Global instrumentality > it is used and stays visible across the various functions.
• Global instrumentality > within the recent days it absolutely was wont to store objects in mappings currently we will use world variables instead.
• Container Object > This object allows you to cache the values that you just wish to scan once more after your next decision using an equivalent user-defined operation.
• From SP14 and on top to avoid world instrumentality. Use the Java Section of Message Mapping to outline world Variables and to use them in your UDF’s.

19. Is it doable to transfer the information while not mistreatment IR(repository)?

Ans:

Yes, it’s doable.

20. What’s the utilization of IDX2?

Maintain the Idoc information. This is often required solely by XI, and not by different SAP systems. IDX2 is required as a result of XI having to construct IDoc-XML from the IDoc. No different SAP system has to try this.

21.What adapter do you have to use whereas desegregation with any SAP system? justify why?

Ans:

SAP provides the USA the subsequent choices to speak with SAP systems.

• IDoc Adapter
• RFC Adapter
• Proxy

Explanation: If you’re taking an in depth scrutiny of the adapters here, the one factor that strikes directly is the usage of proxies. We all know that proxy generation is feasible as long as your WAS is >= half-dozen.20. So, that’s one parameter that comes up at once for the usage of proxies.

Hence Use Proxies as long as the WAS version is >= half-dozen.20. and also the biggest advantage of the proxy is that it invariably bypasses the Adapter Engine and can directly act with the appliance system and Integration engine – therefore it’ll and will offer USA a far better performance.

23. What’s the CCMS button in RWB?

Ans:

It is AN alert or watching for the error messages. to watch SAP elements. CCMS is SAP Computing Center Management System. RWB is swimmingly integrated with CCMS and CCMS alerts are viewed through’ the Runtime Workbench. It provides alert watching for SAP Exchange Infrastructure that is employed for watching any system errors and administration errors. allows monitoring the entire system centrally.

24. What systems are employed in your XI/PI Implementation?

Ans:

Usually, we are going to use Development System, Testing System(QA), Production System. however typically we are going to use Pre-Prod (Pre Production System) conjointly. Before moving all interfaces to Production can use Pre-Prod to check all interfaces with immense volumes. therefore altogether can use the subsequent system for implementation:

• DEV QA Pre-Prod Prod

25.Expertise with necessities Gathering?

Ans:

If you’ve been interacting with the consumer for gathering the req got to indicate to them on what basis the req was gathered.

26. What’s the connection between Product Associate in Nursing part Version? provide an example.

Ans:

PRODUCT:Represents a group of all versions of a product. within the SAP surroundings, a product corresponds to Associate in Nursing SAP technical part, e.g. 4.6c, 4.6d, and 4.7.

COMPONENT:Represents a group of all versions of a package elements samples of package elements ar SAP_APPL, SAP_ABA, SAP_HR package.

27. JMS adapter will speak with what kind of systems? provide some examples.

Ans:

Messaging systems to the combination engine.

28. What’s the Mapping Trace?

Ans:

This object allows the transfer of the message to the mapping trace if the trace level is about correspondingly then the trace is visible to message observation.

29. What’s SAP Netweaver?

Ans:

SAP internet Weaver provides Associate in Nursing open integration and application platform and permits the combination of the Enterprise Services design. Exchange Infrastructure (XI) is Associate in Nursing Integral a part of SAPNet weaver. The position of XI is within the method integration layer of cyberspace weaver stack.

30. What’s a world Container?

Ans:

This object allows you to cache the worth that you just wish to browse once more after you next decide any user-defined performance that’s within the same message mapping.

31. What’s MultiCast?

Ans:

You have the choice of causing a message to multiple receivers and anticipating a response from every of the receivers. This procedure of causing a message to multiple receivers and anticipating a response message is additionally referred to as ‘multicast’.

This object allows you to cache the worth that you wish to browse once more after your next decision identical user-defined perform.

32. What are the categories of Node Functions?

Ans:

Remove Contexts: Take away all higher-level contents of the supply level message so as to map with the target message field. therefore you’ll be able to get the node context removal.

Split by price: Insert Context amendment for part split by price is a few because the counterpart of take away context. Here rather than delivering the context, you’ll be able to insert a context amendment within the supply price queue.

Collapse contexts: Copies initial values of all contexts to 1 context empty context are replaced by Associate in Nursing empty string.

Copy price: What percentage ever times I occur i’m derived simply once”. this is often not a node perform however i’m explaining it because it is employed terribly often in a period of time. allow us to take the Associate in Nursing instance of the fabric cluster, which may occur again and again because of the item node. however since we tend to ar mapping it to the header within the target nodes simply wish to repeat the primary prevalence of the fabric cluster and map it to the header node. Copy price specifically will do that.

Create if: It’ll produce a target node or part that supports some condition.

Exists: Perform to see whether or not a specific supply field exists in the Associate in Nursing instance to be processed. If it will, it provides true alternatively false.

Use one as several.

Replace price: Replace the worth I with the worth that you just desired within the dialogue to perform properties.

iSort: Types all values of the multiply occurring inward field inside the present or set context.

33. What are the 3 objects used at user-defined functions?

Ans:

• Container
• Global instrumentality
• Mapping Trace

34.What area unit the various ways in which Of Communication you’ll Have With Sap System and provides The deserves And Demerits Of Each?

Ans:

Depending on matters you’ll decide that manner you would like to attach SAP computer code from PI. If the WAS version is >= half-dozen.20 then you’ll escort Proxy communication with computer code. With PI 7.3 you’ll use a proxy with Integration engine or Advanced Adapter Engine through SOAP Adapter over XI three.0 protocol.

35. Did you employ an Rfc Adapter? If Your Answer affirmative Then The enquirer raises You what’s Program Id?

Ans:

Program id is one in all the parameters in the RFC sender channel. It ought to be the same in RFC Destination ( Tcode -SM59 ) and XI RFC sender adapter. Once the XI elements are activated, the sender RFC adapter can register itself with program id such as, on SAP entry. you’ll check this by victimizing ‘Test Connection’ in SM59 for your RFC destination. If it’s registered the check association can go fine otherwise it’ll provide a slip.

36.When comparing Rfc Adapter to Idoc Adapter, what are the key differences?

Ans:

Both RFC and IDOC adapter you’ll use for connecting SAP computer code from PI. However, the IDOC adapter you’ll use just for Asynchronous communication whereas the RFC adapter you’ll use for Synchronous conjointly.

37.What Is international instrumentality In Sap Xi?

Ans:

Container object:May be solely employed in the performance it’s outlined in.

Global container:It may be used and stay visible across the various performances.

Global container:within the previous days it absolutely was wont to store objects in mappings currently we are able to use international variables instead.

Container Object : This object allows you to cache the values that you just wish to browse once more once your next decision constant user-defined perform.

From SP14 and higher to avoid international instrumentality. Use the Java Section of Message Mapping to outline international Variables and to use them in your UDF’s.

38.Is It potential To Transfer the info while not victimizing Ir(repository)?

Ans:

Yes, it’s potential.

39.What Is the employment Of Idx2?

Ans:

Maintain the Idoc information. This can be required solely by XI, and not by different SAP systems. IDX2 is required as a result of XI having to construct IDoc-XML from the IDoc. No different SAP system has to do this.

40.Which Adapter must you Use whereas group action With Any Sap System? justify Why?

Ans:

SAP provides a North American country following choices to speak with SAP systems.

• IDoc Adapter
• RFC Adapter
• Proxy

41. What area unit The Activities For Sap Netweaver Xi Integration, Implementation, Post Go-live?

Ans:

SAP NetWeaver XI integration wherever the Involvement of charging the data between SAP and Non SAP System comes into image. Implementation wherever the SAP involvement into the business returns into image.

Go Alive when Developing the interface when coming back acrossing numerous stages like testing the Interface is formed alive or accustomed to the important time state of affairs is claimed to be GO ALIVE.

42.What Is Ccms Button In Rwb?

Ans:

It is Associate in Nursing alert and observance for the error messages. to watch SAP elements . CCMS is SAP Computing Center Management System. RWB is swimmingly integrated with CCMS and CCMS alerts are viewed through the Runtime bench. It provides alert observance for SAP Exchange Infrastructure that is employed for observance any system errors and administration errors. permits monitor entire system centrally.

43.What Systems employed in Your Xi/pi Implementation?

Ans:

Usually we’ll use a Development System, Testing System(QA), Production System. However, we’ll use Pre-Prod (Pre Production System) additionally. Before moving all interfaces to Production can use Pre-Prod to check all interfaces with Brobdingnagian volumes. thus whole can use following systems for Associate in Nursing implementation :

• DEV
• QA
• Pre-Prod.
• Prod.

44. Daily Activities And Responsibilities Of Xi Developer?

Ans:

Monitoring when golive. troubleshoot performance issues once a price tag arises. on development half it’ll be making baccalaureate, objects in IR, configuring in ID supported the state of affairs that what you’re operating within the low level acting on SLD,IR,ID,RWB + developing the scenario+Documentation + supported the necessities style + observance check + Performance+..etc.

45.Experience With Need Gathering?

Ans:

If you have been interacting with the consumer for gathering the req have to be compelled to make a case for them on what basis the req were gathered. These area unit the items you’ll raise the consumer to induce the necessities :

• What is the problem? can this offer declare why they’re going for XI? Here try and perceive the business similarly as integration? wherever XI inherit the picture? .
• Total variety of systems concerned in integration? Is that their SLD? Details? .
• Scenarios (interfaces)? Total? What kind of? However, here yet again this can depend on the project. Sometimes consumers can offer this (or) support the necessity you folks ought to decide? it’s absolutely depends..!!!! beware Then supported the state of affairs you would like to induce the total info . this can be place wherever you’ll raise all the queries from state of affairs to state of affairs. Get all the main points as mentioned below with the exception of the fundamentals try and raise one thing technically.
• Are they providing any XSD,WSDL, documents, Naming conventions..etc Protocols connected like hypertext transfer protocol, ftp, smtp, soap.
• If the file is connected then CSV, Fixed.

46. Where Would You Look Logic Within the Sld.?

Ans:

Business system wizard

47.What a pair of information varieties square measure mechanically Created once The Namespace Is Saved within the Integration Repository?

Ans:

Exchange Fault data and Exchange log information.

48.Which Development Object In Sap Xi Forms The “root Node” Of associate Xml Document once associate Xi Message Is Generated?

Ans:

MESSAGE sort

49. What’s the link Between Product, Product Version, package element associated package element Version? provide An Example.

Ans:

In SAP surroundings, a product corresponds to associate SAP technical elements, e.g. 4.6c, 4.6d, and 4.7 . COMPONENT : Represents a set of all versions of a package elements samples of package elements square measure SAP_APPL, SAP_ABA, SAP_HR package.

50. Jms Adapter will speak With What kind of Systems? provide Some Examples

Ans:

Messaging systems to the combination engine.

51. What Format will Jdbc Adapter Communicate In? must you Use Native Sql?

Ans:

JDBC adapter converts info content to XML messages and therefore the alternative method around.

52. If Communications With Jdbc exploitation Xml Format, What square measure four Actions you may Do?

Ans:

SELECT, INSERT, DELETE, UPDATE.

53. Will the Jdbc Adapter question decibel Tables? Will It Insert?

Ans:

Yes

54.Can Rfc Adapter Be Used For Asynchronous Processing?

Ans:

YES, RFC adapter is used for asynchronous processes.

55. What’s the distinction Between The Party and therefore the Business Service And within which Cases they’re Used With Details?

Ans:

A Communication party represent a layer unit that is concerned in cross-system method (eg. a company). ANd Business service represents an abstract, available unit. business services square measure employed in a cross-company method. for eg if the parties concerned have solely printed their interfaces and not their system landscape or it’s partially familiar. unremarkably we have a tendency to use business services to speak with totally different systems in the same company.

56. What square measures the same old Project situations On the work (legacy Systems Or Erp)?

Ans:

It depends on the shopper demand however you must fathom the R3-MDM integration.most of the need it might be used. connected situations as i discussed square measure MDM-BIW integration, SRM-MDM Catalog, MDM-XI-R3 integration, RPCM,enrichment adapter etc.

57.However Long square measure typically The Projects?

Ans:

It depends on the shopper’s demand.

58.The way to Solve the subsequent Error coming back In Message Monitoring?

Ans:

Http_resp_status_code_not_ok visit dealings SICF /default_host/sap/xi/engine double click on service currently check whether or not you’ve entered correct data for the subsequent fields.

59.The way to Solve the subsequent Error coming back In Message Monitoring?

Ans:

Run time exception In Message-mapping Transformation:

The error is in Message Mapping. visit the check tab and check the message mapping with the incoming payload file. Check the supply structure with the computer file that you just square measure causing to XI. each structure ought to be precisely the same. I mean all nodes and therefore the node structures. Refresh the cache (both Delta cache and full cache) in SXI_CACHE dealings in PI.

60.The way to Solve the subsequent Error coming back In Message Monitoring?

Ans:

Obligatory Node Xxx Missing within the Idoc Structure Xxx The error is in Message Mapping. Check the node xxx and make certain all its attributes square measure mapped properly. For Ex: SEGMENT=”1″ and BEGIN=”1″.

61. Partner property Kit Is Directly Integrated With?

Ans:

Integration engine.

62. The way to Solve the subsequent Error coming back In Message Monitoring? No Receiver might be Determined?

Ans:

Problem is in Receiver Determination. Check it. If everything is ok then simply edit amendment|and alter} one thing then take away that change and once more activate the receiver determination.

63.The way to Solve the subsequent Error coming back In Message Monitoring? Party and repair Not outlined.

Ans:

• The problem is that the file isn’t able to get any party or service designed for itself.
• Check the structure of the computer file and make sure that identical structure is assigned to the Sender Interface.

64. A way to Solve the subsequent Error returning In Message Monitoring? Error whereas Refreshing The Xi Runtime Cache.

Ans:

• The problem is in Cache refresh.
• Go to SXI_CACHE, then from Menu – XI Runtime Cache – select “Start Delta Cache Refresh” (F6) and so select “Start Complete Cache Refresh” (shift + F6).

65.When Transporting Pi Objects, The Objects aren’t obtaining Updated / Created within the Target System?

Ans:

Go to group action SE01 -> Transports -> world info -> Transports -> check the error displayed there. Also ensure that the business systems square measure is prepared for supply and target system before transportation.

66. When Some Changes Or Modification In Sld. the Changes aren’t reflective In Ir Or Id

Ans:

67. A way to Transport Alert Rules?

Ans:

Create a bench transport request manually with group action SE09.Double click on the transport request and click on the button ‘edit change’. For Program ID enter R3TR, for Object sort enter TABU and for Object Name enter SMS ALERT RULES.

Now click on the button with the key image (located underneath ‘Function’). Click on ‘Insert row’ and enter * for the table key. Save the request, unleash it and import it within the target system. Refer SAP Note 1110295

68. A way to check The Alert?

Ans:

You can check the alert by corporal punishment the report RSALERTTEST.

69. If Idoc Has Been Modified In R/3 Then What ought to Be finished relevancy Pi?

Ans:

70. A way to method The Messages Stuck In Queues?

Ans:

Check the queues victimization transactions SMQ1 (outbound)/SMQ2 (inbound). Resolve the displayed errors. you’ll be able to cancel the messages from SXMB_MONI.

71. A way to Solve the subsequent Conversion Error In Message Monitoring? Unable To Convert The Sender Service Xxxx To Associate in Nursing beer system.

Ans:

• This error happens just in case of eventualities with IDOC adapters. Whenever you employ business systems, certify that the corresponding system name is maintained within the SLD.
• Open your business system within the Integration Directory. Switch to alter mode.
• Click the button that claims ‘Compare with System Landscape Directory’ and select Apply. Save and activate your amendment list.
• In case of business services, you’ll be able to manually blood type system names within the Adapter .
• Specific Identifiers if needed. This name ought to match the corresponding system name outlined within the partner SAP system’s partner profiles.

72. A way to Monitor Bpm?

Ans:

Use the group action code SXMB_MONI_BPE.

73. Concisely make a case for Netweaver?

Ans:

SAP NetWeaver provides Associate in Nursing open integration and application platform and permits the combination of the Enterprise Services design. internet weaver covers following topics:

• People Integration.
• Process Integration.
• Information Integration.
• Application Platform.

74. What square measure The Integrations In Netweaver?

Ans:

People integration, data integration, method integration and application platform.

75. What square measure The elements In Netweaver?

Ans:

Mobile infrastructure, enterprise portals, biw and MDM, sap xi (integration broker and bpm) net AS.

76. What’s The Message Flow In Sap Xi?

Ans:

Inbound handling, receiver determination, interface determination, channel determination, mapping, outward handling.

77. What square measure Routing Rules?

Ans:

78. What square measures the categories of helpful node functions?

Ans:

1.RemoveContexts : “There is totally no distinction between my kids or grandchildren or great-grandchildren”.Material cluster is distributed within the item node of the supply idoc however I need it within the header node of the target idoc. Therefore I would like to fool the mapping runtime that the Material cluster is returning within the header node of the supply. removeContext specifically will do that.

2.SplitByValue : “I would like a special parent for each instance of me”I can attempt to make a case for the operation with a similar mapping as readers will correlate well. every instance of Item no within the supply structure ought to generate a target itemNo and item beneath a special instance of the header node within the target. As {we can|we will|we square measure able to} observe that occurrences of things within the supply and target structure are completely different; we tend to not map the weather of the item node directly. We tend to use splitbyValue to realize something similar.

3.CollapseContexts : ” there’s simply a small distinction between my kids or grandchildren or great-grandchildren”. just like removeContext however context amendment is replaced with “. If we want to make empty tags within the target for each context amendment within the supply we will use it. I failed to realize it helpful therefore I don’t wish to make a case for it.

4.Copy worth : “How several ever times I occur i’m traced simply once” this can be not a node operate however i’m explaining it because it is employed terribly oft in time period.Let us take Associate in Nursing instance of a fabric cluster, which may occur as over and over because the item node. However, since we tend to square measure mapping it to the header within the target node I simply wish to repeat the primary incidence of the fabric cluster and map it to the header node. copyValue specifically will do that.

5.Createif : “I have criteria for existing”. it’s used after you wish to make a target node or component supported some condition.

79. What square measure Service Users?

Ans:

They have sap user roles on the abap a {part of} the SAP net as that’s out there on the J2ee part as teams.

80. What The Central Administration group action To Manage The Alerting?

Ans:

ALRTCATDEF.

81. What are The Tools employed by Runtime To Monitor?

Ans:

ccms (computer center management system), pmi (process observation infrastructure) and alert framework.

82. The Message Has Been Sent From Sender To Pi Or From Pi To Receiver however Nothing Is Coming Back In Message observation. Where is that Input File?

Ans:

The file got stuck within the PI queue. Check the following.

• qRFC Monitoring: dealings SM58 Click Deregistration Click Registration.
• qRFC monitor (Outbound queue) Check the queue and monitor the matter.
• qRFC monitor (Inbound queue) Check the queue and monitor the matter.

83. What will the Partner property Kit Enable?

Ans:

84. What’s the method Performed In Runtime Workbench?

Ans:

Message observation, Element observation, Performance analysis and Message alerting.

85. What are Unicode Sap internet As Platforms?

Ans:

Oracle and ms sql

86. Integration of PM with EWM?

Ans:

The SAP EWM integration with SAP PM(EAM) permits simple adaptation and usage with quick time to price and a coffee TCO for patrons. advanced PM order management for maintenance for large assets (Mining, Oil & Gas, etc.)

87. What’s SAP and why is it used?

Ans:

As one of the world’s leading code systems dedicated toward the management of business processes, SAP facilitates effective processing and data flow across organizations. SAP connects all elements of a business into an associate degree intelligent suite on a completely digital platform.

88. Justify PI- method Integration?

Ans:

Process Integration is often used as a Middleware Engine to speak in a very distributed atmosphere. The center of XI is that the Integration Engine that’s used for desegregation of completely different technologies mistreatment normal electronic communication techniques e.g XML. completely different mapping tools are out there for mapping the distributed system which may be mapped while not having any experience of Technical Details. As a real-world example, XI are often useful in desegregation of completely different banks with SAP R/3. XI Engine additionally supports previous releases of SAP R/3 like four.6C and have more adapters to speak with inheritance systems.

89.When can we tend to opt for BPM?

Ans:

• Error Handling.
• Splitting of messages.
• Combining of messages.
• Message purpose.

90. What are the standard Of Services that come underneath Asynchronous Processes?

Ans:

Exactly once and precisely once so as.

91.What are the SAP XI Components?

Ans:

• Integration Builder.
• Integration Server.
• System LandScape Directory.
• Runtime Workbench.

92. What are the dealing codes in XI?

Ans:

93. What are the functions utilized in graphical mapping?

Ans:

• Conversions.
• Boolean.
• Node Functions.
• Constant.
• Date.
• Text.
• Static.
• Arithmetic.

94. What are DOM and SAX?

Ans:

DOM	SAX
SAX is an easy API for XML.	DOM is Document Object Model.
SAX computer program may be a memoryless computer program and is suggested once the XML structure is big.	A DOM computer program massages the complete XML into the memory and then once the XML size is just too huge, A DOM computer program is to be avoided.

95. What’s CIM?

Ans:

Common data model, XI has developed suggests that Ans) Central Intelligence Machinery the SLD is for a central repository information|of knowledge} concerning code and system within the data center, expressed within the Common data model. Central Intelligence Machinery was developed by DMTF (Distributed Management Task Force). It’s associate degree trade pool whose goal is to modify the management of IT systems in a very distributed atmosphere and mistreatment of net standards.

96.What are the gait tcodes?

Ans:

97.What is the employment of gait patterns?

Ans:

Patterns ar a lot of just like the example wherever u will consult with the IS or u will create use of these in your situation :

98.If u don’t offer FTP affiliation details however can check the input message?

Ans:

If u don’t offer FTP affiliation details however can check the input message.

99. What’s cache monitoring?

Ans:

Cache watching displays objects that are presently within the runtime cache of either of the subsequent receivers of cache knowledge.